logo
منزل أخبار

105 Degree Heat Resistant PVC Cable: Ratings, Ampacity and Practical Limits

الصين Shanghai Shenghua Cable (Group) Co., Ltd. الشهادات
الصين Shanghai Shenghua Cable (Group) Co., Ltd. الشهادات
المورد لطيفة، والاستجابة والسرعة، ووقت التسليم السريع، منتجات ذات جودة عالية. أنا محظوظ لتجد لك!

—— جون حداد

لقد عملنا معا لمدة 5 سنوات ، هم مورد جيد و freinds جيد ، شرف لنا للعمل معهم.

—— محمد الرباعي

أنا مسرور جدا مع خدمة هذه الشركة، وأعتقد أن أعمالهم سوف يكون أفضل وأفضل.

—— دانيال

يستحق العرض التقديمي والمهني الذي قدمتموه لنا ترحيبًا حارًا. يجب أن يكون Shenghua مستقبل أكثر إشراقا.

—— رينديل بروستر

قراءة المزيد ... الصفحة الرئيسية> معلومات الاتصال معلومات الاتصال معلومات تسجيل الدخول معلومات الاتصال معلومات الاتصال معلومات الاتصال معلومات الاتصال معلومات أخرى

—— KHADBAATAR

ابن دردش الآن
الشركة أخبار
105 Degree Heat Resistant PVC Cable: Ratings, Ampacity and Practical Limits

Summary

A 105 degree Celsius PVC cable is the pragmatic answer to a problem that XLPE solves expensively: a circuit that runs hotter than a standard PVC cable allows, but does not justify a change of insulation family. Heat resistant PVC compounds raise the continuous conductor temperature from 70 to 105 degrees Celsius, which increases the current a given cross section can carry and allows cable to be used in hot locations, in equipment enclosures and in lighting circuits. This guide explains what the 105 degree rating actually covers, how the compound differs, where the rating is accepted and where it is not, and how to specify it without confusing it with fire resistance. Six answers follow on ampacity, derating, standards and service life.

105 degree heat resistant PVC insulated cable for hot locations and lighting circuits

What the 105 Degree Rating Covers

The number is the maximum continuous conductor temperature. It applies to the insulation compound, and it assumes the cable is installed according to its rating and not mechanically damaged. The rating does not mean the cable surface reaches 105 degrees, and it does not mean the cable can be installed in a 105 degree ambient, because the conductor temperature results from the current plus the ambient.

The compound differs from standard PVC in its plasticiser system and its thermal stabiliser package. A standard compound begins to lose plasticiser and embrittle above 70 degrees, and the loss accelerates with temperature. A heat resistant compound is formulated to retain its properties at higher temperature for the expected life, which is why it costs more per kilogram than the standard material.

The conductor must also be suitable. A 105 degree rating assumes a conductor and termination that can operate at that temperature. Standard terminals, solder joints and some connectors have lower limits, and a cable rated at 105 degrees terminated in a 70 degree connector is limited by the connector. The rating of the system is the lowest rating of its parts.

The rating is recognised in some standards and not in others. Some national standards define 105 degree PVC compounds for particular applications, and some equipment standards reference them. In projects governed by a standard that defines only 70 and 90 degree PVC, the 105 degree product may be offered as an equivalent to XLPE rather than as a standardised item, and the acceptance depends on the specifying engineer.

Why It Is Useful

The first benefit is ampacity. A higher permissible conductor temperature means more current for the same cross section, or the same current with a smaller section. In a retrofit where the duct is full and a larger cable will not fit, a 105 degree compound can solve a capacity problem without changing the route.

The second benefit is hot locations. Ceiling voids, roof spaces, plant rooms, boiler houses and lighting circuits in enclosed fittings can exceed the ambient assumed by standard cable ratings. A heat resistant compound provides margin without moving to a different insulation family.

The third benefit is cost compared with XLPE. Where a 90 degree XLPE cable would require different terminations, different jointing practice or a different approval, a 105 degree PVC cable may be accepted by the engineer with the existing accessories, reducing the disruption of a change.

The fourth benefit is availability. Heat resistant PVC is a standard product for many factories, while special XLPE constructions may carry minimum quantities. For a modest quantity with a tight schedule, that difference matters.

The limitation is equally important. A 105 degree rating is not a fire rating. The cable will still burn, and it does not provide circuit integrity in a fire. Where fire survival is required, a mineral or mica tape construction is needed, and a heat resistant PVC cable is not a substitute.

How to Specify Heat Resistant PVC

State the conductor temperature and the standard that recognises it. Then state the ambient and the installation method, so that the supplier can confirm the current rating. A 105 degree cable in a 60 degree ambient carries less than the same cable in a 30 degree ambient, and the derating must be calculated.

State the terminations. If the circuit uses standard connectors rated at 70 degrees, the benefit of the cable is limited, and the buyer should know that before paying for the higher grade. Where the connector is the limit, the right solution may be a larger cross section of standard cable rather than a higher temperature rating.

Confirm the compound and ask for the heat ageing data. A heat resistant compound should show retained elongation and tensile strength after ageing at the rated temperature, and the data should be from the actual compound, not from a generic datasheet.

Do not use the rating to solve a ventilation problem. If a duct bank is overheating because of congestion, the correct answer is to reduce the loading or improve the installation, not to raise the insulation temperature. The heat still has to go somewhere, and the connector, the joint and the equipment are all affected.

Verify on delivery. The sheath print should state the temperature rating, and the certificate should reference the compound. A sample check for print and dimension is enough for most orders, with a laboratory check for critical applications. Products such as the NYY 4x50mm2 Weather Resistant PVC Insulated Cable Aerial Installation 0.6/1kV IEC60502 and the XLPE Insulated Power Cable In Red Color For LV/MV Power Transmission Systems represent the kind of circuit where a heat resistant grade is usually considered.

Where 105 Degree Cable Fits in a Design

The clearest case is lighting. Luminaires and their enclosures run hot, and a standard PVC cable looped through a fitting can exceed its rating. A heat resistant grade provides margin without changing the circuit design, and it is accepted by many specifications for exactly this reason.

The second case is equipment wiring inside control panels and machinery, where the ambient inside an enclosure can be well above the room temperature and where the cable is short and accessible. Here a heat resistant PVC cable is often the practical choice between standard PVC and a silicone or XLPE alternative.

The third case is a retrofit where the existing duct cannot take a larger cable. Raising the conductor temperature rating allows the existing cross section to carry more current, provided the terminations and the equipment are also rated for the higher temperature. That condition is often overlooked, and it is the one that decides whether the retrofit is safe.

Service Life and Derating

A heat resistant compound is not immune to ageing. Continuous operation at the maximum rated temperature consumes life faster than operation at a lower temperature, and the relationship is not linear. A cable that runs at 105 degrees continuously will have a shorter life than one that runs at 80 degrees with occasional excursions to 105, even though both are within the rating.

The practical consequence is that the rating should be treated as a ceiling, not a target. A designer who uses the full 105 degree allowance to minimise the cross section has left no margin for a hot day, a blocked ventilation path or an increase in load, and the cable will reach the end of its life earlier than the calculation assumed.

Derating for ambient temperature and grouping still applies. A 105 degree cable in a 55 degree ambient with six other loaded cables in a tray carries far less than the free air rating, and the calculation must use the actual conditions. The higher rating buys margin; it does not remove the need for calculation.

Comparison With Other Insulation Options

The main alternatives to a 105 degree PVC compound are XLPE, which is rated 90 degrees but tolerates higher short term overloads and has better dielectric properties, and silicone or other high temperature elastomers, which go far higher but cost several times more and require different accessories.

The practical comparison is therefore between heat resistant PVC and XLPE. XLPE offers a higher short circuit temperature and a lower dielectric loss, which matters in medium voltage and in high current circuits. PVC offers easier termination, better flame behaviour in some tests and lower cost for low voltage work at moderate temperatures.

The choice often comes down to the terminations and the approvals rather than to the insulation itself. A project that already uses PVC accessories and has approvals based on PVC constructions will find the 105 degree grade an easier change than a switch to XLPE, and the reverse is true in a project built around XLPE.

Heat Resistant Specification Checklist

Confirm the conductor temperature, the ambient, the grouping, the termination rating and the standard that recognises the compound. A 105 degree cable in a hot enclosure with 70 degree terminals is limited by the terminals, and the buyer should know that before paying for the higher grade.

  • Continuous conductor temperature
  • Ambient and grouping factors
  • Terminal and equipment ratings
  • Standard reference confirmed
  • Heat ageing data requested

Where the circuit is critical, a short thermal calculation by the designer is worth more than a larger cross section chosen by guesswork.

Documenting the Rating

The temperature rating should appear on the sheath print and in the certificate, and the compound designation should be stated on the datasheet. Where the rating is used to justify a smaller cross section, record the calculation with the installation conditions, because a future alteration that adds load or blocks ventilation will invalidate the assumption. A cable chosen for its rating should be documented as such, so that the reason survives the departure of the engineer who made the decision.

Where the application is inspected, keep the heat ageing data with the test certificate. It is the document that demonstrates the compound performs as claimed, and it is rarely available from a supplier who does not manufacture the compound to a controlled formulation.

FAQ

Is 105 degree PVC the same as XLPE?

No. XLPE is rated 90 degrees but has better overload behaviour and dielectric properties. Heat resistant PVC is a 105 degree compound within the PVC family.

Does the 105 degree rating increase ampacity?

Yes, because the permissible conductor temperature is higher. The installation conditions still apply, so derating is required.

Can I use standard terminals?

Only if they are rated for the temperature. The system rating is the lowest rating among cable, terminal and equipment.

Is heat resistant PVC fire resistant?

No. It burns like other PVC compounds. Fire survival requires a mineral or mica construction.

What is the service life at 105 degrees?

It depends on the compound and the actual operating temperature. Continuous operation at the maximum reduces life compared with cooler operation.

Is 105 degree PVC widely accepted?

In some standards and applications, yes. In others it is offered as an alternative to XLPE and requires the engineer's approval.

Conclusion

A 105 degree PVC cable is a genuine engineering option for hot locations and capacity problems, provided the compound, the terminations and the derating are all handled correctly, and provided it is not mistaken for a fire rated product. Specify the temperature, the ambient and the standard, confirm the connector ratings, and verify the compound with heat ageing data. Shanghai Shenghua Cable Group supplies heat resistant PVC insulated cable rated 105 degrees Celsius, with compound data and current ratings stated for the installation conditions, and it will advise where XLPE would be the better choice. Send your circuit conditions through our contact page and our engineers will confirm the grade. Related items include the 3 Core Copper Low Voltage XLPE Insulated Power Cable For Industrial Wiring, the shanghai shenghua power cable 1.5sq mm 2.5sq mm Single Core Electrical Cable Wire For Fixed Wiring H05V-K H07V, the Muti-Cores XLPE Insulated Power Cable CE IEC KEMA Certification, the Three Core Copper Conductor XLPE Insulated Power Cable With Copper Tape Screen, the 8.7 / 15 KV XLPE Electric Cable Copper Conductor Steel Tape Armored PVC Inner Sheath and the PVC Sheath 3Cx300 Three Core XLPE Insulated Power Cable.

Recording the reason for the grade keeps the design decision visible long after the project team has moved on.

حانة وقت : 2026-11-17 15:58:29 >> أخبار قائمة ميلان إلى جانب
تفاصيل الاتصال
Shanghai Shenghua Cable (Group) Co., Ltd.

اتصل شخص: Ms. Mayling Zhao

الهاتف :: 86-21-68172999

الفاكس: 86-21-58179888

إرسال استفسارك مباشرة لنا (0 / 3000)